BMW picks AMS battery sensor interface for i3

BMW is using the AMS AS8510 integrated automotive sensor interface to provide battery voltage and current measurements in its i3 series of electric vehicles.
The i3 in volume production today includes an AS8510 in the battery sensor. The battery management system (BMS) monitors battery voltage and battery current of the 400V li-ion battery powering the electric motors, and ensures the functional safety of the vehicle’s battery systems.
Accurate current and voltage measurements enable the BMS to calculate a li-ion battery’s state of charge (SoC). This means the driver benefits from an accurate estimation of the range the vehicle can cover before the battery is completely discharged.
When backed by a calibration scheme, the sensor system can measure current to an accuracy of ±0.5% and voltage to an accuracy of better than ±0.1% over the full operating temperature range of the AS8510 (-40 to +125˚C) and over its life time.
Features of the device, including zero-offset architecture, low noise, high linearity, multi channel architecture and low drift, are claimed to have made the task of designing the i series’ current and voltage measurement system easier than using other sensor interface architectures.
The device provides integrated data acquisition front ends, which include two independent 16bit sigma-delta ADCs. Measuring current across a shunt resistor in one channel over a range from a few milliamps up to 1kA, it provides a digital output via a serial peripheral interface. Through the second channel it can capture three different voltage sources simultaneously with current samples.
Fully compliant with AEC-Q100, the device supports the functional safety compliance efforts of car manufacturers in line with ISO26262.
“The techniques for monitoring the SoC and the state of health in electric vehicle batteries are constantly being refined and improved, and BMW has set a new benchmark in battery management system design in the new i3 model,” said Bernd Gessner, vice-president and general manager of the automotive business unit at AMS. “AMS is proud to have supported BMW’s advanced implementation of ultra-accurate battery parameter measurement in the demanding environment of a vehicle drivetrain.”
