DC-DC converter module suits commercial or military vehicles

A DC-DC converter module based on Powerstax’s F501 brick technology has been introduced for next-generation vehicles. The Flexistax D1001 is a 1kW rated module capable of supporting typical system efficiency levels of 86%.

It exhibits operational flexibility, with an input voltage range covering 10 to 36V DC and a choice of 12, 13.8, 15, 24, 28, 32 and 48V DC standard outputs. This means the modules are optimised for the electric or fuel cell powered vehicle market, either in commercial or military use.

A four-channel boost converter enables DC voltages to be stepped up or down as required. This boost converter delivers a non-isolated bus voltage that drives the two parallel configured brick converters, so the regulation, isolation (2.2kV DC) and stability (less than 2% peak-to-peak ripple) needed by modern electronics can be realised.

Conduction cooled using a baseplate, it has an operational temperature from -25 to +85˚C. With a form factor of 238 by 145 by 30.85mm, this open construction unit can be cold wall mounted, allowing the baseplate temperature to be kept at +100˚C or below without the need for complex thermal management.

Protection mechanisms are incorporated into the module to ensure functional longevity. These include an I2C temperature sensor to prevent overheating and an automatic reverse polarity to safeguard against mixing up of power connections.

As well as automotive designs, these DC-DC converter products are also suited to remote battery, generator or fuel cell powered sites (such as mobile infrastructure and industrial monitoring stations), back-up power systems, as well as various up-mast applications.

They comply with the EN60950-1 safety standard.

www.powerstaxplc.com

Recommend to Colleagues: