Hall-effect sensor aids ABS applications

A1688 Hall-effect sensor IC from Allegro Microsystems

The A1688 from Allegro Microsystems is a Hall-effect sensor IC for true zero-speed digital ring magnet and gear tooth sensing in two-wire automotive applications such as ABS.

Industry-leading performance is claimed in areas such as pitch deviation accuracy, consistent supply current distribution (better than six-sigma), low jitter and EMC performance provided by an integrated capacitor that reduces the need for external components.

Incorporated are a dual-element Hall-effect sensor and signal processing circuitry that switches in response to differential magnetic signals created by magnetic encoders or, when properly back-biased with a magnet, from ferromagnetic targets. A digital circuit reduces magnet and system offsets, calibrates the gain for air-gap independent switch points, and provides true zero-speed operation.

Signal optimisation occurs at power-up through the combination of offset and gain adjustment, and is maintained throughout operation with the use of a running-mode calibration scheme that provides immunity from environmental effects such as micro-oscillations of the sensed target or sudden air-gap changes.

The regulated current output is configured for two-wire interface circuitry, and is suited to obtaining speed information in wheel speed applications. The Hall element spacing is optimised for high-resolution small-diameter targets.

The device comes in a UB package, which integrates the IC and the high-temperature ceramic capacitor in a single over-moulded sip with an outside diameter of less than 6.5mm. The package is lead (Pb) free, with 100% matt-tin lead-frame plating.

www.allegromicro.com

Recommend to Colleagues: