Error message

No active batch.

Video decoder suits rear camera displays

An integrated analogue video decoder that eliminates the need for external op amps while enabling performance advantages through programmable short-to-battery and short-to-ground detection has been introduced by Intersil. The TW9990 video decoder is suitable for automotive rear camera displays and other camera systems.

Automotive rear camera displays have become a popular driver safety feature. According to Edmunds market research, 70% of 2012 vehicles were outfitted with rear cameras. Also, market research firm ISuppli reports that nine in ten new cars have console screens as an option.

The quality of the video – along with the cost and footprint of the camera system – are critical factors when adding this safety feature to new vehicles.

The low power analogue video decoder supports NTSC, Pal and Secam single-ended, differential and pseudo differential composite video inputs as well as S-Video. A single 27MHz crystal is all that is needed to decode all analogue video standards.

Typical power consumption is about 100mW for composite inputs. A power-down mode further reduces consumption.

Most automotive analogue cameras are cabled as differential twisted pair to reduce common mode noise. Traditional analogue video decoders only support single-ended inputs, meaning automotive system designers must place a video op amp in front of the decoder to convert differential signals to single-ended.

The TW9990 eliminates the need for the external op amp as it supports differential composite video signals directly, and has built-in programmable short-to-battery and short-to-ground detection. This is an essential functionality required by OEMs when supporting a differential signal input.

AEC-Q100 grade two qualified, it comes in a 32-lead 5 by 5mm WFQFN in bulk tray packaging.

www.intersil.com

Recommend to Colleagues: