Analog Devices DSP creates engine sounds for electric vehicles

Analog Devices has introduced an embedded system for generating engine sound for electric and hybrid electric vehicles.
The ADSP-BF706 digital signal processor and electric vehicle warning sound system (EVWSS) firmware enables automobile manufacturers in North America and other regions to comply with future safety regulations mandating external engine sound for EVs and HEVs travelling at low speeds.
It includes a complete hardware and firmware reference design, and can be scaled for higher performance with the ADSP-BF706 or entry-level applications with the ADAU1450 digital audio processor.
The device can also be used to create in-cabin engine sound to contribute to an improved driving experience for vehicle owners.
Memory mapped quad SPI memory provides faster and simpler access to the stored audio files used to create the engine sound. It can access up to 24 wav files simultaneously, compared with conventional products that can typically access only five.
The firm’s Sigma Studio integrated development environment (IDE) enables OEMs to tune the audio sound graphically when using the ADAU1450. This allows sound engineers with little programming experience to optimise audio performance while reducing development time.
A release of Sigma Studio supporting the ADSP-BF706 is due later this year. In addition, a low-cost Can software stack runs on the ADSP-BF706 to help users quickly build automotive-grade prototypes.
The device has a Blackfin+ core with up to 400MHz performance. There is dual 16bit or single 32bit mac support per cycle. Features include 16bit complex mac and other instruction set enhancements. The instruction set is compatible with previous Blackfin products.
On-chip memory comprises: 36kbyte L1 sram with multi-parity-bit protection (64kbyte instruction, 64kbyte data and 8kbyte scratchpad); 1Mbyte on-chip L2 sram with ECC protection; and 512kbyte on-chip L2 rom.
Peripherals include USB2.0 HS OTG, two Can 2.0B, ePPI video IO; two Sports (w/I2S), two quad-SPI and one dual-SPI (w/host mode), I2C, two uarts, and SD/SDIO/MMC (4bit).
The ADSPP-BF706 comes in an 88-lead LFCSP and the ADAU1450 in a 72-lead LFCSP.
