Intersil device can monitor 12-cell Li-ion battery pack

Intersil has announced the ISL78610 12-cell lithium-ion (Li-ion) battery pack monitor. The device provides cell balancing and accurate voltage and temperature monitoring to safeguard Li-ion battery packs in hybrid electric vehicles, plug-in hybrid electric vehicles and electric vehicles.
System designers can use the device as a standalone battery-pack monitor or as a redundant back-up device when combined with the ISL78600 multi-cell battery manager. This combination enables automobile manufacturers to achieve ISO 26262 Asil D rating.
The ISL78610 monitors and balances up to 12 cells with accurate voltage readings and diagnostics. This lets system designers make informed decisions based on absolute voltage levels rather than simply receiving a “system not OK” signal indicating an out-of-range condition.
It includes a voltage reference, 14bit analogue-to-digital converter and registers for control and data, while connecting directly to a microcontroller through its 2Mbit/s SPI interface. The device also has four external temperature inputs, and includes fault detection and diagnostics for all key internal functions.
The battery monitoring and management ICs meet the safety, reliability and performance requirements of next generation automotive battery pack systems. Together, the ISL78610 and ISL78600 provide internal and external fault detection such as open wire, over and under voltage as well as temperature and cell balancing faults to mitigate battery pack failures.
Multiple devices can be daisy-chained together to support systems with up to 168 cells using a proprietary communications system that provides transient and EMC and EMI immunity, which exceeds car maker requirements. The daisy-chain architecture uses low-cost capacitive isolation with twisted pair wiring to stack multiple battery packs together, while the IC’s internal protection guards against hot plug and high voltage transients. A watchdog timer automatically shuts down a daisy-chained IC if communications are lost with the master microcontroller.
“The ISL78610 battery pack monitor provides customers the right combination of Li-ion battery pack monitoring and control features,” said Philip Chesley, senior vice president of precision products at Intersil. “Teaming the monitor with the ISL78600 battery manager also gives car makers the robustness, accuracy and redundancy required to achieve an Asil D compliant battery management system.”
Both devices are AEC-Q100 grade-two qualified for operation from -40 to +105˚C and come in a 10 by 10mm, 64-lead TQFP.
