Is e-ticketing the future for public transport?

How do you succeed in buying the correct bus or train ticket these days? Complicated user menus at ticket vending machines can often baffle the most tech savvy users. Even in the best-case scenario, purchasing a ticket from a vending machine takes valuable time.
When a passenger has finally gotten their hands on the necessary piece of paper, the next question is whether the ticket needs validating before departure. Rules vary from one place to another. Not having the correct change, complicated vending machine menus and incomprehensible tariffs with zones, peak and off-peak times and strip tickets can easily turn travellers willing to pay into involuntary fair dodgers. The current paper-based ticketing system is complicated and time consuming for the users of public transport; for the providers it is expensive.
The future is electronic
To ease the situation, e-ticketing systems are being rolled out across many cities. The German capital Berlin, for instance, has already installed e-ticketing for many routes. E-tickets make the ticket buying process easier and faster for passengers. Sometime in the near future the entire travel chain – from trams, buses, coaches, underground, commuter and long-distance trains to planes – will be covered by a single medium. It will then be possible to travel with all types of transport and providers without having to think about fare zones or battling with ticket machines. Customer comfort increases.
Check-in, check-out
With the purchase of an e-ticket, the passenger is in possession of a permanent ticket. Upon boarding, the passenger swipes this e-ticket over a validator, which registers the boarding station. When getting off, the e-ticket is again swiped over the validator to register the destination stop. The passenger is billed for the distance travelled.
It is up to the respective transport provider to decide whether payment is taken automatically from a pre-loaded card or invoiced. The traveller can rest assured that he or she is always in possession of a valid ticket and will only pay for the distance travelled. The e-ticket replaces the flat-rate tariff system with one based on actual usage. The contactless validation of an e-ticket makes boarding a bus or train much faster than when the ticket needs to be inserted into a validating machine.
Transport providers
A contactless ticketing system benefits both passengers and transport providers. The transport company gets accurate statistics on the number of passengers at each stop and can tailor its services to the demand. The analysis points to potential savings while improving the service at peak times. Stops get shorter because boarding is faster. The contactless system is also immune to tampering attempts. There is less risk of vandalism because there are no slots to stick chewing gum into, for instance. The few e-ticket vending machines that are still necessary can be stationed in central, well-monitored sites.
The transport companies save money and increase their revenues because the need to mail monthly tickets or print paper tickets disappears. With less vending machines and easier cash logistics, maintenance and repair costs also decrease. The number of fare dodgers is likely to decline.
One such system is the IVU Validator, an electronic ticket validating machine developed and manufactured by MCS Micronic Computer Systeme on behalf of its customer IVU Traffic Technologies. A project of the Association of German Public Transport Providers (VDV, Verband der Deutschen Verkehrsunternehmen), the e-ticketing system enables automatic, cash-free and contactless payment that is valid across all participating transport providers. The intelligence behind the validator is provided by the Conga-QA/Z510-1G com module from Congatec.
The contactless ticket concept with the validator is already internationally successful. In Colombia, for example, approximately 600 buses are equipped with the equipment.
No contact required
The e-ticket includes RFID and communicates contact free over a distance of up to four centimetres from the validator. The technical concept of the VDV core application provides cryptographic methods to verify mutual authenticity. Ticket and validator can be sure that the received data are valid and the source of the data is authentic.
While it was easy to forge a paper ticket, an e-ticket is much more secure. The e-ticket with RFID has a systemic advantage compared with a magnetic stripe or chip: dirty contacts or worn magnetic stripes simply do not exist. Because the communications are contactless, it also works in dirty, grimy environments. Since the contact-free technology is hygienic and the equipment easy to clean, there are plans to extend the e-ticketing system to include services related to travel, such as parking garages, car-sharing pools or even food outlets at train stations.
Industrial strength
The validator controls the public transport entry and exit points. Cryptography enables it to communicate securely with the RFID of the e-ticket, record account details and forward them. An optional touch screen with brightness sensors adjusts to lighting conditions making it easy to read at any time; even the card reader antenna is illuminated.
The validator supports ISO14443 (A/B) contactless smart cards and NFC devices according to ISO/IEC 18092. It can also scan and check tickets with barcodes (1d/2d). GPS provides information about the location, while the validator itself communicates via UMTS. All these features require computing power. More ideas and requirements are likely to be added in the future.
At the same time the system is designed for low-power consumption, because it feeds off the vehicle battery when installed. Therefore, precautions against voltage dips, transients and other disturbances have been built in. Because the validator is installed on-board the vehicle, it has a mechanically robust design that is shock, vibration and vandal proof and specified for the extended automotive temperature range.
Partners
IVU Traffic Technologies is a large software company whose core competence lies in the development of IT products for public passenger and freight transport and transport logistics. Its 350 employees from 15 nations at eight locations design software, develop concepts, implement systems, streamline operations and advise more than 500 customers. The e-ticketing system required a powerful device, so IVU Traffic Technologies went looking for a partner with experience in the development and manufacturing of devices that are suitable for installation on-board vehicles.
Since 1977, MCS has been developing and producing customised high-tech devices such as machine control and payment systems, GPS modules, printers and modems that are subject to extraordinarily harsh requirements in outdoor use.
MCS received the ISO 9001-certificate supplement from the German Federal Motor Vehicle and Transport Authority (KBA, Kraftfahrt Bundesamt) for hardware and software development, production, sales and service of equipment and components in the areas of self-service terminals, machine control and metrology. This KBA certification allows MCS to build devices for use in vehicles. MCS also has the required bus and rail expertise. On-board electrical systems in such vehicles are prone to numerous faults, transients and spikes, facts that need to be accounted for in unit sizing. Since MCS also has experience in the development and manufacturing of contactless payment systems, it was a perfect fit for IVU’s requirements.
MCS assumed full product responsibility for the development of the validator, including development, specification, design, construction, mould, hardware and software development, prototyping, pre-production and series production. It made sure that all designs were economical to produce and qualitatively feasible. Its in-house production facilities were another plus point compared to a pure development partner. The result is a validator that is EMC proof, shock and vibration resistant and compliant with industry standards. Inside the aluminium and plastic housing sits the Conga-QA/Z510-1G module, which provides the necessary computing power.
Benefits of com
The VDV technical concept and specifications require a flexible and secure method for an interoperable, modern ticketing system that is also capable of handling yet unknown future requirements. For this very reason, MCS chose to base the validator on com technology. The strength of the com concept lies precisely in its flexibility for future developments. Com is a standard for which many manufacturers offer processor modules. As long as only the standard properties are used within a com form factor, the product is vendor independent and any module of the form factor can be used.
A com module contains the processor with the necessary peripherals and supplies. It is effectively a complete computer. The module is mounted onto a custom carrier board, which houses all application-specific properties. The combination of module and carrier board yields an application-specific device with the latest computing power. The crucial know-how remains in-house.
Com manufacturers such as Congatec have specialised in the development and production of these off-the-shelf, pre-configured modules. MCS opted for the QA/Z510-1G, based on the x86 Atom platform, because of its low power consumption and moderate costs. Another factor was the physical dimension of the module, because space inside the validator is limited.
Scalability
Another advantage of the com concept is its scalability. Within an application the need for computing power can vary. The market offers compatible coms with a variety of processors that all work on the same carrier board. This makes it possible to select the optimum module within a product family from a price-performance standpoint. This is exactly why the validator won a project in Switzerland. The Swiss project required higher graphics performance and larger memory configuration for successful implementation. The validator normally uses Congatec's QA/Z510 module; however, by exchanging it with the QA/Z530, a module with higher performance, the validator won the business.
"In addition to the price-performance ratio, the most important features for us were the scalability of the CPU power and the optional onboard IDE SSD with 8Gbyte,” said Reinhold Mühlich, managing director of MCS. “The module with the Intel Atom Z500 processor impressed us with its low power consumption and small physical dimensions. Space and battery capacity in the vehicle were our limiting factors."
The more powerful product was presented much earlier than the competing product. By using the com concept, MCS can develop customer products more quickly than would be possible with separate processor developments. New devices are created by combining a proprietary carrier board with a processor generation that is appropriate for the application. This usually requires only minor adjustments.
Partnership is key
For six years, MCS has been working with Congatec and using its coms for demanding customer applications. The collaboration has developed into a trusted partnership with close technical and commercial support. Although the modules themselves are standardised, successful implementation depends on details such as the supplied firmware, software, operating system modifications and/or design support. All modules come pre-integrated with many standards and real-time operating systems and include all necessary peripheral drivers.
"We know the technical specialists at Congatec personally,” said Mühlich. “They always help us promptly and competently. We are physically close. Congatec’s products are of very high quality and competitively priced. We can pass these benefits on to our customers."
Conclusion
Using public transport will become much easier in the future thanks to e-ticketing and transport providers will be able to be more profitable. An important component of e-ticketing is the validator. The deliberate and consistent concentration of all partners on their own strengths plus a future-proof com concept, which provides scalable CPU performance, safeguards against discontinuation and guarantees long-term module availability, opens the door to future success.
