Shipments start for Can FD microcontroller

Spansion Traveo microcontroller

Spansion has started shipping samples of its Traveo S6J3100 automotive 32bit microcontroller series incorporating the Can FD interface for in-vehicle networking. Applications include body control module, heating, ventilation and air conditioning.

Like classic Can, Can FD enables reliable vehicle control, taking advantage of higher data rates with only a small impact on current software and applications.

"This announcement underscores our commitment to technology leadership in our Spansion Traveo family of automotive microcontrollers," said Nobuhiko Akasaka, vice president of Spansion's automotive MCU business. "The delivery of the Can FD interface in our MCUs provides industry-leading performance."

In addition to the Can FD interface operating at 5Mbit/s, the device comes with up to 4Mbyte of flash memory and uses 55nm technology. It also has secure hardware extension for network security and improved performance for connected cars, as well as advanced partial wakeup for lowering power consumption.

The family is based on the Arm Cortex-R5 core and tailored for automotive applications. In May 2014, Spansion introduced the first product of the family, the MB9D560 for vehicle electrification used in hybrid electric vehicles and electrical vehicles.

The 144MHz high-speed operation is possible using a single power supply. Efficient use of CPU performance increases memory access speed and lowers power consumption.

Normally, when A-D conversion is performed from the low power-consumption mode, the CPU is interrupted and the system returns to normal operation. Afterwards, it is necessary to start the A-D converter from the CPU. However, when using partial wakeup, power is cut to items other than the real-time clock (RTC). Then, once the RTC performs a specified count, the A-D converter is started and conversion begins without passing through the CPU. If conversion results are not within the scope of set values, it is possible to start the CPU through interruption. Partial wakeup makes it possible to lower power consumption even further when periodically checking for sensor malfunctions.

www.spansion.com

Recommend to Colleagues: