Warming up

Single-phase DC-DC converter; the high current output may require paralleling of more mosfets for each switch

Davide Giacomini looks at digital power management as cars move from 12 to 48V

 

Although past moves to increase the automotive operating voltage from 12 to 42V ultimately failed, the current growing popularity of micro-hybrid vehicles (µHEVs) including intelligent micro hybrids with part-time electric traction is raising fresh demands for a higher voltage standard. By drawing on power technology developed for high-performance computing applications, IC manufacturers can help system designers overcome the challenges associated with transferring and balancing power between the vehicle’s high-voltage and conventional 12V domains.

 

Coexistence

The current proposal for a higher automotive operating voltage is based on implementing new 48V systems alongside established 12V systems. µHEVs need this higher voltage to manage energy recovered by the regenerative braking system, and also to power the 48V electric motor used to propel intelligent µHEVs, or i-µHEVs, for short distances. Such part-time electric traction can help reduce emissions in city centres, and generally delivers a significant improvement in fuel economy. Typically, energy recovered is stored in a 48V lithium-ion battery. This is used to power systems connected directly to the 48V bus and also may be down-converted to 12V for charging the 12V battery and for supplying 12V systems such as the car radio, infotainment equipment, and various pumps and motors.

One of the most important new requirements of this proposed dual 48 and 12V infrastructure is the need for a mid to large power DC-DC bidirectional converter to manage the flow of energy between the 48 and 12V batteries. Depending on the number of loads connected to the 12V network, this converter may need to operate at power levels from a few hundred watts up to 1.5kW or more when transferring energy to the 12V domain. Conversely, there may be a need to return energy from the 12V battery back to the 48V network in boost mode. Boost operation may be required for a number of reasons, and may call for energy transfer ranging from only a few hundred watts up to a level comparable to the main step-down conversion. Hence, depending on individual manufacturer requirements, a suitable converter should be able to handle energy flowing in both directions, at a power level from around 300W to as much as 3 to 5kW.

Assuming the converter is to handle a maximum of 2kW, this power rating implies a current output of around 160A. A conventional single-phase converter topology such as that shown in the diagram could be used. Although this would deliver the advantage of a relatively simple control scheme, it also has several important drawbacks. Firstly, a large number of power transistors (mosfets) are connected in parallel, which requires close matching of mosfet switching performance and imposes complex demands on the mosfet gate driver. In addition, the switching frequency is usually restricted to around 100 to 200kHz to avoid excessive switching losses. This, in turn, calls for relatively large input and output capacitors.

Alternatively, by using a multi-phase converter topology, such problems can be avoided and a number of valuable extra advantages can be gained. In the multi-phase converter, individual phases comprising a pair of mosfet switches and an inductor filter are connected to a common output capacitor. In this case the output current capability is increased by adding extra phases rather than by connecting mosfets in parallel.

 

Multi-phase converter

By avoiding the use of large numbers of mosfets connected in parallel, this alternative and clever multi-phase topology does not require close matching of mosfet switching characteristics. Although a larger number of gate drivers is required, these can have significantly lower current-driving capability. A higher switching frequency can also be used; an n-phase converter can be switched at n times the maximum frequency of a comparable single-phase converter. This brings a number of advantages, including a significant increase in control bandwidth thereby allowing faster transient response. In addition, the ripple current passing through the output capacitance is greatly reduced, which allows the use of smaller, lower-cost capacitors and can enhance reliability.

As a further advantage, a multi-phase converter provides the flexibility to activate a reduced number of phases when the converter is operating at lower power levels, and thereby improve efficiency. In addition, designers can scale designs relatively quickly and cost effectively by optimising the number of phases provided according to the needs of each individual application.

It is worth noting that multi-phase converters are equally well suited to bidirectional operation as single-phase converters. Just as in the single-phase case, the 48 to 12V multi-phase buck can be simply driven as a boost converter to obtain a 12 to 48V conversion in the opposite direction. The changes are confined only to the switching-control strategy applied to the mosfets.

 

Proven in practice

Multi-phase converters have been used for several years in the PC industry, helping to increase efficiency and reduce the cost and bulk of the power system. A multi-phase digital controller IC can control up to six individual phases that are each implemented using a power-stage IC containing an efficient gate-driver IC with co-packed mosfets. This requires few external components – including the output filter inductor – to complete the design.

The controller IC coordinates actions such as the adding and dropping of phases according to load current, and is able to optimise the gate-drive voltage in response to real-time current variations. Innovative controller features, which have been proven in PC applications, include an adaptive transient algorithm, which allows designers to reduce output bulk capacitance and system cost, and built-in auto phase-detection capability with auto-compensation. This combination has enabled converters of up to six phases, capable of handling output current up to 180A, to be implemented within a very small space on the PC motherboard. Adapting the technology for automotive applications could yield valuable space savings in cars of all types.

One key advantage of this approach to multi-phase design over DSP or microprocessor-based digital-power methods is that the controlling IC is a state machine that executes a pre-configured algorithm. As such, no software is needed and no stall situation can be encountered in operation. When developing similar converters for automotive applications, the absence of any need to certify software to applicable automotive standards helps simplify the challenge.

 

Multi-phase

Work is now happening with automotive systems builders to develop multi-phase systems that are compatible with automotive environmental constraints, voltages and power levels. There are several obvious differences between PC and automotive applications. Clearly, the automotive converter requires a higher input voltage of 48V instead of 12V. The 12V output voltage is also higher than the 1V typically required for a modern multi-core processor. In addition, the switching frequency per phase is potentially lower, at around 100 to 200kHz compared with 400 to 800kHz. In addition, as already discussed, a key requirement of automotive applications is the need for bidirectional current flow, from the 48 to 12V domain (buck mode) and from 12 to 48V (boost mode).

Some constraints, however, are less severe in the automotive context. Whereas a PC-type converter must control the output voltage to within a few millivolts, accuracy of around 50mV is adequate in an automotive application. In addition, automotive load transients are less steep, since these are mitigated by the effects of cabling. This allows the converter to be designed for maximum current variation steps of around 100A/ms or less.

Taking into account these and other technical observations, and the views of automotive users to help define essential converter capabilities and desirable features, automotive digital multi-phase controller and power stage ICs have been developed.

 

Conclusion

Although mass-market uptake of plug-in electric vehicle will remain a vision of the future for some time, micro-hybrids are in use today and are raising demand for electrical systems capable of handling significantly more power than is possible with the conventional 12V standard. The need for an efficient power converter capable of linking the 12V infrastructure with new 48V systems is driving the emergence of a new class of multi-phase buck-boost converters that draw on experience from the PC industry and are optimised for the automotive electrical environment.

 

Davide Giacomini is automotive IC, product management and application director at International Rectifier

www.irf.com

Recommend to Colleagues: