Guest blog: Getting the measure of electric vehicles

Anoop Gangadharan from Yokogawa discusses the measurement challenges of electric vehicles
The key challenges inhibiting the widespread consumer acceptance of electric vehicles are the need for greater charging capacity, reduced charging times and longer travelling range. Achieving improvements in these areas will require thorough evaluations of in-vehicle components and subsystems including the powertrain, charging system, brushless DC motors, ECU communications and steering. With a multitude of testing scenarios across the development cycle, various measurement parameters and their associated challenges need to be addressed.
For example, while powertrains require accurate evaluation of electromechanical efficiency and torque, tests on brushless DC motors may require analysis of PWM signals and transients. Similarly, while evaluation of battery charging and discharging requires positive and negative cycle analysis, future developments in wireless charging will need measurements at lower power factors and frequencies in the range of hundreds of kilohertz.
Moreover, while embedded electronics, ECUs and communication bus signal testing need precise waveform analysis, the evaluation of inverter waveforms needs to account for and reduce harmonic superimpositions through isolated inputs, high-speed sampling and long-time observation.
Evolving requirements
Measuring electric and hybrid vehicle efficiency will typically need multi-channel DC and AC analysis along with physical parameters such as rotational speed, pulse times and actuator angles measured from sensors and rotary encoders. However, from R&D to manufacturing to compliance testing, the measurement of efficiency, harmonic content, battery charging and discharging, and communication bus signals requires both progressively greater accuracy and consistency in measurement over the specified ranges and conditions.
In the early stages of developing individual components, engineers may only need waveform analysis at limited accuracies, but when a multi-component subsystem or system is concerned, optimising the entire system takes precedence over the individual components. Optimising for efficiency in this ecosystem of components, systems and subsystems will require consistently repeatable and highly accurate measurements.
Getting it right
Engineers today are faced with broad choice of instruments to address their measurement challenges. Oscilloscopes focus on waveform analysis, power analysers focus on accuracy and hybrid instruments like power scopes and combined oscilloscopes and recorders extend the scope of measurements to areas such as time-domain measurements or flexible data acquisition. But with measurement needs varying or evolving depending on the type of application and stage of development, it is often not possible to solve every measurement problem with a single instrument.
For example, precision power analysers are ideal for motor evaluation as they go beyond measuring electrical parameters and enable measurement of rotation speed and direction, torque, mechanical power, synchronous speed, slip, electrical angle, motor efficiency and total system efficiency from the analogue or pulse outputs of rotation and torque sensors. On the other hand, combined oscilloscopes and recorders offer a single real-time overview of Can and Lin bus measurements with electromechanical measurements to speed up development and fault finding.
It is therefore important to assess measurement technology requirements against stage-based objectives of accuracy class, number of channels, input ranges, electromechanical measurements and computational capabilities before investing in ways to achieve long-term improvements in manufacturing productivity, time to market and product quality.
Anoop Gangadharan is product marketing manager for test and measurement at Yokogawa in Europe
