Hall sensor IC uses thermal enhancement

Targeted at automotive, industrial and renewable energy markets, the ACS770 from Allegro Microsystems is an integrated Hall-effect based linear current sensor IC incorporating thermal enhancement to increase precision.
The device consists of a low-offset linear Hall circuit with a copper conduction path near the die. Applied current flowing through this copper conduction path generates a magnetic field, which the Hall IC converts into a proportional voltage.
Total output accuracy is achieved by using a piecewise linear digital temperature compensation technique for offset and sensitivity. This improves the IC's accuracy and temperature stability without influencing the high-bandwidth (125kHz) operation of the analogue output. The noise performance results from the use of proprietary amplifier and filter design techniques.
Device accuracy is optimised through the close proximity of the magnetic signal to the Hall transducer. A precise output voltage that is proportional to the current flowing in the conductor is provided by the low-offset chopper-stabilised bicmos Hall IC, which is programmed and calibrated for accuracy at the factory. Lower power loss results from the fact that the internal resistance of this conductive path is typically 100µΩ.
Integrated shield technology provides immunity to potential interference from current variations in the conductor path and stray electric fields, resulting in low output voltage ripple and low offset drift in high-side, high-voltage applications.
The thickness of the copper conductor allows survival of the device in high over-current conditions. The terminals of the conductive path are electrically isolated from the signal leads, allowing the sensor ICs to be used in applications requiring electrical isolation without the use of optoisolators or other costly isolation techniques.
The product is lead (Pb) free. All leads are plated with 100% matt tin, and there is no lead inside the package. The heavy gauge lead frame is made of oxygen-free copper. It is available in a five-pin package.
