Position sensors suit harsh environments

The KMXP position sensors from Measurement Specialties can be soldered to a PCB via automated standard assembly methods, reducing production costs. The contactless sensors can measure linear displacement, movements, torque and velocities in dirty and harsh environments typical found in vehicle, engine, automation and general industrial applications.
Operating temperature is -40 to +150˚C and they come in a 2 by 6 by 0.75mm DFN package. The use of pole wheels allow for accurate angular measurements on the shaft circumference, achieving resolutions better than 0.001˚ (19bit).
The small wall thickness allows for large air gaps – up to half of the sensor’s respective pole pitch – that won’t affect performance, since signal amplitudes only depend on the magnetic field direction and are nearly independent of the magnetic field strength.
Both incremental and absolute position detection is possible with the non-contact, anisotropic magneto-resistive measurement principle of the sensors. Because they detect a magnetic field gradient, they are virtually insensitive to homogenous stray fields and vibrations. This contributes to the high accuracy measurement by allowing for increased resolution at high speeds, up to several meters per second.
The output is sine-cosine with 10mV/V. In combination with an interpolator device and magnetic scales, measurement ranges from µm to km are possible with high precision.
Current models are the 2mm pole pitch KMXP2000 and 5mm pole pitch KMXP5000, with a 1mm pole pitch version scheduled for later this year. All are pin-compatible and employ a common PCB layout. They are Reach, 3TG and RoHS-compliant.
