Sensor IC suits hybrid electric vehicle inverters

A factory-programmable linear Hall-effect current sensor IC from Allegro Microsystems has a high-frequency operation that makes it suitable for use in hybrid electric vehicle inverters, DC-DC converters, and electric power steering applications.
The A1366 is designed to achieve high accuracy and resolution by the use of proprietary linearly interpolated temperature compensation technology, programmed at the factory, which provides sensitivity and offset that are virtually flat across the full operating temperature range. Temperature compensation is carried out in the digital domain using integrated eeprom technology without sacrificing the analogue signal path bandwidth.
The ratiometric Hall-effect sensor IC provides a voltage output that is proportional to the applied magnetic field. The factory programming of the sensitivity and quiescent (zero field) output voltage gives a typical accuracy of better than ±1% over the full operating temperature range.
The IC incorporates a highly sensitive Hall element with a bicmos interface circuit that uses a low-noise small-signal high-gain amplifier as well as a low-impedance output stage, along with a proprietary high-bandwidth dynamic offset cancellation technique. These advances in Hall-effect technology provide a claimed industry-leading sensing resolution at the full 120kHz bandwidth.
The device can be used in any current sensing system requiring high bandwidth operation.
Broken ground wire detection is also built into the device for high reliability in automotive applications. It is AEC-Q100 automotive qualified. Device parameters are specified across an extended ambient temperature range from -40 to +150˚C.
The IC comes in a four-pin single in-line package (suffix KT) with a 1mm thick case. The device is lead (Pb) free, with 100% matt tin lead-frame plating.
