Buck converter from Diodes suits point-of-load use

Diodes AP61100Q automotive-compliant, synchronous buck converter

Diodes has announced the AP61100Q, a 5.5V, 1A continuous output current, automotive-compliant, synchronous buck converter for point-of-load applications.

With an integrated 110mΩ high-side power mosfet and 80mΩ low-side power mosfet, it provides step-down DC-DC conversion from 5 and 3.3V input rails. The converter has been developed for use in automotive applications including infotainment, instrumentation clusters, telematics and adas.

A multi-functional programmable EN pin lets the device operate in forced PWM, where the frequency is constant across all loads, or in pulse frequency modulation (PFM). When in PFM, it delivers up to 89% efficiency at 5mA light load and a quiescent current of 15µA.

The buck converter has an output of 0.6 to 3.6V and operates at 2.2MHz to avoid AM radio band frequencies.

By using constant on-time control, the buck converter can achieve fast transient response, loop stabilisation and low output voltage ripple.

It is qualified to AEC-Q100 grade one, supports PPAP documentation, and is manufactured in IATF 16949 certified facilities. The device comes in the sot563 1.6 by 1.6mm package.

www.diodes.com

Recommend to Colleagues: