Melexis shrinks LED drivers for automotive lighting

Melexis MLX81123 LED driver

Melexis has extended its Lin RGB family with the MLX81123.

Ambient LED lighting is a key design feature for automotive manufacturers, enhancing the user’s experience and helping OEMs provide visual distinction. With OEMs using ambient lighting extensively across their latest models, maintaining a reliable supply chain is paramount.

As a successor to Melexis’ popular MLX81113, the third-generation MLX81123 has soic8 and DFN-8 3 by 3mm packaging. This enables the use of light in any location of the car, whereas before there were limitations due to space constraints.

Using silicon-on-insulator (SoI) technology allows for an increased number of ICs per wafer. The result is one of the smallest RGB Lin IC controllers on the market and an increase in production output volume.

With common software design and pin-to-pin compatibility (soic8) with its predecessor, it can be integrated into existing designs. Replacement of current MLX81113 chips with the MLX81123 is often possible without a full development cycle.

The device delivers RGB according to Lin 2.x and SAE J2602. It supports system integration up to Asil B under ISO 26262.

The 16bit MCU is equipped with 2kbyte ram, 32kbyte of application-usable flash, and a system rom with a bootloader and Lin driver. A built-in 512byte eeprom allows for configuration, such as LED calibration coefficients, which are needed to ensure uniform cabin brightness and colour representation.

The Lin system includes a transceiver and protocol handler, which facilitate the seamless connection between RGB ambient modules and the pre-existing Lin network of the vehicle. Featuring four high-voltage IOs with free configurable current sources up to 60mA, it can support RGB and white LEDs from a wide range of suppliers, allowing for procurement flexibility.

The IC’s independent 16bit PWM output provides precise colour and brightness control of any connected LEDs, meeting the demands of vehicle ambient applications such as door trim, accent and interior cabin lights.

In sleep mode, it exhibits a typical standby current of 25µA and has a 28V jump start, as well as battery monitoring with over and under-voltage detection. Operating temperature is -40 to +125˚C with a built-in temperature sensor for thermal monitoring.

“Ambient lighting transitioned from an aesthetic option in high-end vehicles to a fundamental automotive feature, providing a new landscape for customisation and visual differentiation,” said Michael Bender, product line manager at Melexis. “This creates additional demand for automotive LED controllers.”

www.melexis.com

Recommend to Colleagues: