Rohm speaker amps target autonomous driving

Rohm has announced AEC-Q100 qualified 2.8W output class AB monaural speaker amplifiers. The BD783xxEFJ-M units are for instrument clusters used in vehicles equipped with autonomous driving and adas.
In recent years, technological innovations in the automotive field – such as autonomous driving and adas – have required a greater variety of sounds, such as warning sounds when departing from the lane or to alert the driver to surrounding obstacles. As a result, even audio output systems in the instrument cluster are using speaker amps to generate sound with an MCU, instead of relays that produce blinker sounds and electronic buzzers that emit warning sounds.
However, until now it was difficult to ensure safe, stable sound output at loud volumes.
Rohm developed the series for vehicle clusters requiring various sound outputs at high volume, including warning sounds, turn signals, welcome tones and voice guidance.
Also, adopting a type of over current protection circuit provides protection against output shorts (damage due to accidental terminal contact) to deliver a 2.8W output that was difficult to achieve in the past, making it possible to deliver high 2.8W output.
In addition to over current protection, built-in thermal shutdown and under voltage lock out ensures protection against abnormal conditions.
Furthermore, satisfying AEC-Q100 and having the capability of withstanding operation up to +105˚C enable stable voice output without compromising functionality even under severe conditions.
With conventional over current protection circuits, the maximum output is limited, since the operating threshold of the protection circuit must be set to a value smaller than the maximum current the speaker amp can provide.
In contrast, this over current protection circuit eliminates the need to limit the output by preventing waveform distortion even at high output. This allows the series to provide over current protection from output shorts, which was difficult to achieve in the past in combination with high output – (2.8W maximum at 4Ω load and 10% distortion.
Adopting a power package reduces heat generation even at high volumes, resulting in stable audio output without compromising functionality, even under severe conditions.
The speaker operational amps are mounted on Cypress Semiconductor’s Traveo cluster MCU family S6J3360 evaluation board for automotive applications, allowing for easy evaluation under conditions similar to real cases.
Products have output gains of +6dB (BD78306EFJ-M), +10dB (BD78310EFJ-M) and +26dB (BD78626EFJ-M). The line will be expanded to include 11 models ranging from +6 to +26dB in 2dB steps.
