TVS array protects automotive data lines

Semtech RClamp 0524PQ transient voltage suppression array

Semtech has introduced the RClamp 0524PQ, a four-line integrated transient voltage suppression (TVS) array for protecting automotive data lines against electrical transient threats.

Today's cars come equipped with a variety of infotainment, navigation and camera assist systems that require high-speed interfaces to transport data. Inadequate ESD protection for these interfaces can lead to replacement or repair costs.

By offering a 20 per cent reduction in clamping voltage and an enhanced ESD immunity level – ±25kV air discharge and a ±15kV contact discharge – along with a low capacitance rating, the device addresses the protection needs of the high-speed data lines found in today’s cars, including LVDS and HDMI.

The requirement that protection components have little effect on the signal integrity of high-speed signal lines is critical to ensuring data integrity. The optimised design of the device lets it meet compliance tests that measure signal integrity in HDMI and LVDS lines.

The stable and low capacitance enables the device to reside on high-speed data lines without compromising key signal performance metrics. The flow-through structure of the package facilitates trace routings for system designs and provides an additional safety margin for meeting signal integrity requirements.

“Today’s car manufacturers are increasingly employing high-speed data transmission technologies in automotive infotainment applications,” said Rick Hansen, product marketing director for Semtech. “The RClamp 0524PQ not only exceeds the stringent ESD immunity requirements common on automotive designs, but also affords automotive designers superior quality and performance to satisfy the EMC requirements on high-end car platforms.”

Transient protection for high-speed data lines is to: IEC 61000-4-2 (ESD) ±25kV (air), ±15kV (contact); IEC 61000-4-4 (EFT) 40A (5/50ns); and IEC 61000-4-5 (lightning) 4A (8/20μs).

It has 5V working voltage protection and protects four IO lines. Capacitance is less than 0.4pF line-to-line and it comes in a 2.5 by 1.0mm package. It is Pb free and RoHS and WEEE compliant.

 

www.semtech.com

 

 

Recommend to Colleagues: