Renesas radar MCU suits adas and autonomous vehicle applications

Renesas  RH850/V1R automotive radar MCU

Renesas Electronics has announced an RH850-based, 32bit, automotive radar microcontroller for use in future adas and autonomous driving vehicles.

The RH850/V1R includes a digital signal processor and high-speed serial interfaces, and is designed for middle- to long-range radars.

Software and tools including evaluation boards will also become available to enable system developers to start their development immediately.

With the expansion of adas and autonomous driving, sensors are fast becoming a key technology. Currently vehicles are being equipped with a broad spectrum of sensors such as cameras, lidar and ultrasonic sensors. In particular, radar sensors are required for adas applications, including advanced emergency braking and adaptive cruise control, because, unlike other sensors, radar sensors are not negatively affected by external environmental limitations such as adverse weather conditions.

Additionally, high precision sensing becomes critical in realising future autonomous driving to meet the increasing requirements of range resolution, separation of objects and precision in measurement of velocity. This requires increased numbers of antennas and boosting the signal processing performance.

To address these needs, the RH850/V1R-M MCU was designed for radar applications in adas and includes optimised, programmable digital signal processing, a dual core at 320MHz with high-speed flash of 2Mbyte, and 2Mbyte internal ram.

It is designed to have optimised hardware acceleration in the DSP. The DSP lets system developers process the raw data into target objects efficiently, separately from the safety relevant classification and tracking done in the CPUs. The DSP performs radar specific algorithms such as fast Fourier transforms, beam-forming, windowing, channel calibration and peak search, at high speed and with low power consumption.

A DSP maths library has been developed for automotive radar sensors to support system developers in their algorithm development.

The MCU was developed using 40nm embedded flash process technology.

The process specification fulfils what is claimed to be the highest temperature requirements in the industry – T-junction +150˚C.

There are two G3MH CPU cores operating at 320MHz. The G3MH is a superscalar risc architecture with two seven-stage integer pipelines, which allows execution of two different instructions at the same time. Each core achieves a performance of 3.2DMips/MHz.

Samples and the DSP maths library will be available from the second half of 2017. Mass production is scheduled to begin in November 2018.

A flexible programmable complete toolchain with C/C++ compiler, debugger, simulation models and detailed performance profiling tools will also be available.

www.renesas.com

 

 

Recommend to Colleagues: