Sensors: Making waves
Steve Rogerson talks with Texas Instruments about how its cmos mm-wave sensors could be a key component in the trend towards autonomous driving
About ten years ago, researchers at Texas Instruments embarked on a project that reached fruition last month with the launch of millimetre wave (mm-wave) single-chip cmos sensors that could find their way into automotive applications that were not even on the drawing board a decade ago.
The AWR1x 76-81GHz family is said to deliver up to three times more accurate sensing than current mm-wave products by combining analogue design techniques with digital signal processing on one piece of silicon.
“We are incredibly excited about this,” said senior vice president Greg Delagi. “We have invested very heavily to innovate and this investment started about ten years ago. We can now introduce it to the market.”
Just as importantly, he said the company had the infrastructure in place to guarantee supply for five, ten or even 15 years, key for many of the autonomous driving projects being considered. But this is not just a long-term vision as the devices have been out to test with car makers and tier-one suppliers for the past year and now that they are in mass production Delagi is confident they will be providing driver assistance in road cars either by the end of this year or early next year.
But the mass market being targeted is autonomous driving with some watchers predicting ten million self-driving cars on the road by 2020.
“Some may disagree with the actual number or the time scale, but it will happen,” said Delagi. “The world is changing. There is an undeniable trend about the role electronics is playing on the road to cars that will drive themselves.”
But, as he said, for this to happen “there is a whole bunch of things that need to be sensed” such as range, velocity, angles and so on.
“There may be metals that you need to sense through without disruption in the ability to sense,” he said. “And think about the environment, fog, darkness, rain and so on. These bring challenges to sensor technology. We believe very strongly that mm-wave is the only sensor technology that is robust enough to meet all the challenges.”
The problem until now has been that to implement mm-wave sensing, multiple chips have been needed to handle the transmitter, receiver, amplifier, ADC, DAC and, of course, the processor itself. These bring with them problems in accuracy, size, power consumption and complexity.
“What we are doing is combing these into one,” he said. “Our breakthrough is the smallest, most sensitive mm-wave sensor. We are doing this with cmos, a high-volume technology that is used very broadly in the semiconductor industry. It has taken us years of design work to get to where we wanted these chips to be.”
He is particularly pleased with the accuracy, which he said could detect to within the width of a human hair.
“Think of that accuracy and what that will enable from an application point of view,” he said.
Also important is the power consumption, a claimed quarter that of other products, down to 150mW. This brings with it a smaller size, with the full sensor to be just 25 by 25mm – the chip itself is 10.4 by 10.4mm.
“But we didn’t just want to bring out a chip,” he said. “We wanted a family of products for the different markets that we can serve. And we wanted it easy for an engineer to access the technology, so we have development boards, software, documentation, all available.”
Sameer Wasson, a general manager at TI, added: “We have focussed a lot of effort to help professionals get going and start sensing out of the box in 30 minutes or less.”
There are versions aimed at both industrial and automotive but the automotive ones have been designed with the ISO 26262 functional safety standard in mind at Asil B level. They also contain automotive specific interfaces. There are three ranges in the automotive section. The basic AWR1243, which needs to be coupled with an external processor, can be used for existing applications such as emergency braking, adaptive cruise control and automated highway driving.
Moving up to the AWR1443; this has an integrated processor for proximity sensing applications such as occupant detection, body sensor, in-cabin gesture recognition and driver monitoring.
“These exist in some of the high-end vehicles today,” said Wasson. “But we have a single-chip standalone senor that can bring these applications into the mainstream. This is the simplest and smallest standalone device for this.”
At the top end is the AWR1642 targeting ultra-short and short-range radar.
“This is our most integrated device with everything on one die,” said Wasson. “This is a robust way to know what is around the car.”
Here, the applications include blind spot detection, rear collision avoidance and warning, lane change assist, pedestrian and bicycle detection, collision avoidance, cross traffic alert, surround view, and parking assist.
“All our sensors have the ability to dynamically change from high-speed driving to low speed manoeuvring,” said Wasson.
However, with the aim for vehicles to have multiple chips all operating in the same millimetre wave band as well as multiple cars, often in close proximity, there could be a danger of interference. Wasson said that had been taken into account.
“The sensors are designed to work with other sensors,” he said. “The signal processor and main processor provide the intelligence to coexist with other sensors.”
Designers can select the best processing power for their needs with a fully integrated cmos single-chip harnessing digital signal processor and microcontroller or with just an MCU or DSP. The MCU used is a 200MHz Arm Cortex R4F. Each chip delivers stand-alone sensing with less than a 4cm range resolution, range accuracy down to less than 50µm and range up to 300m. The software development kit includes sample algorithms and software libraries to simplify RF designs through less than 20 application programming interfaces.
“These sensors make what ultrasonic sensors are doing now meaningless,” said Delagi. “I don’t see the point in anyone having an ultrasonic sensor when you have these.”
And TI knows that other chip companies are working along similar line.
“We expect competition, there is competition,” said Wasson. “But we are they only one with a single chip for integrating RF, DSP and MCU. We have been talking with a lot of OEMs and their response has been very positive. It has been very well received.”
