Wireless: Safe driving

Typical V2V conventional terrestrial channel model

Houman Zarrinkoub from Mathworks compares the options for V2X wireless technology

To make roads safer, improve autonomous driving and further the aims of the smart city, one particularly important field is vehicular communications, a cooperative communications technology. This technology enables continuous, high-speed, authenticable interactions between moving vehicles.

Vehicular communications are typically categorised into four use cases: communications of vehicles with other vehicles (V2V); vehicles to the roadside infrastructure (V2I); vehicles to pedestrians (V2P); and vehicles to the cellular network (V2N). These use cases together are known as vehicles to everything (V2X) and have the potential to change roads significantly for the better.

 

Safer roads

Transportation safety is set to improve considerably with the arrival of V2X technology. A report by the US Department of Transportation’s National Highway Traffic Safety Administration says: “If V2X technologies alone are widely deployed, they have the potential to address 81 per cent of light-vehicle crashes.”

Indeed, V2X technology will provide safety features above and beyond what is offered in other advanced driver assist systems (adas) of today.

Most of these are reliant on computer vision, radar or lidar technologies. The issue with such technologies is that their signals cannot penetrate through vehicles and no information is available about vehicles that are outside the line of sight.

By contrast, V2X provides critical information about vehicles that are inside and outside the line of sight, provided that they are within a certain communications range. Therefore, V2X makes both semi-autonomous driver-based systems and fully automated systems much more situationally aware. Increased situational awareness means vehicles can cooperate and reduce accidents in various traffic scenarios.

 

Better adoption

Automotive V2X technology has a large potential market. According to Juniper Research, the V2X market is anticipated to reach $3bn by 2022 with a 26% annual rate of growth. It is expected that half of new vehicles will have V2V hardware by 2022. Three sectors make up the market:

 

  • • Devices and semiconductors: RF transceivers and V2X chipset makers such as Denso, Continental, Delphi, Qualcomm and Infineon;
  • • Cellular infrastructure: manufacturers (Huawei, Nokia and Ericsson) and carriers (AT&T, NTT and Docomo); and
  • • Automobiles: manufacturers such as Toyota and Honda (Japan), GM and Ford (USA), and BMW, Daimler and Audi (Germany).

 

Options

For the implementation of V2X technology, two candidate technologies are being put forward: dedicated short range communications (DSRC) and cellular vehicle-to-any-device (C-V2X) communications. Both are made to operate at the 5.9GHz band and must adhere to strict reliability and delay requirements: communications latency of less than 100ms delay; communications range of at least 300m; and supported vehicular speeds of typical highway velocities.

DSRC is a derivative of wifi technology. In DSRC, communications protocols – phy and mac layers – are specified by the IEEE 802.11p standard. Automotive companies such as Toyota, Honda and GM are among the proponents of this technology.

The work on DSRC started in 2009, and its communications protocols were fully characterised by 2010. Its supporters say that all aspects of DSRC standards from application layer to phy layer and all safety considerations have been addressed in the past eight years of development. They believe the technology is ready for deployment on a large scale from 2017.

DSRC has known limitations, including support only for the V2V and V2I applications and an upper bound of reliability for vehicle density and communications range.

C-V2X is based on 4G-LTE cellular technology. It is part of the device-to-device (D2D) communications protocol of the sidelink (proximity server) mode of the LTE-Advanced standard. Therefore, it allows every device to detect every other device in its proximity directly.

Unlike DSRC, it supports the V2N and V2P vehicular communications use cases. Compared with DRSC, it supports higher speeds (up to 250km/h) and higher density (thousands) of vehicles.

The proponents of C-V2X technology are in a consortium of automotive and wireless device manufacturers known as the 5G Automotive Association (5GAA). These include Intel, Ericsson, Nokia, Audi, BMW, Qualcomm and Denso. According to the 5GAA, the cost of developing a DSRC-based service is far more than that of those based on C-V2X. Moreover, the gap in technology advantages between C-V2X and DRSC will increase after 5G cellular networks are introduced.

So far, neither of these technologies has been selected as the mandated V2X technology in any country. It is likely that both will be adopted; vehicles will be equipped with a smart way to understand and decode data transmitted and received through each of these technologies.

 

Pain points

Practitioners of V2X technology include software and hardware developers, integrators and service providers, and testers and performance monitors. The main problems in developing V2X technologies are visualisation, prototyping and model evolution.

Practitioners must be able to achieve the following:

 

  • • Visualise, update and monitor vehicular dynamics and wireless sensor networks, including position, velocity and acceleration of vehicles in network; vehicles entering and exiting the network; RF signal strength at each vehicle; status of links between each vehicle; and other system elements.
  • • Prototype different collision avoidance and traffic resolution algorithms on V2X chips. This involves wireless modem operations handling transmission and reception of basic safety messages, and also collision avoidance algorithms and traffic control messages that the vehicle processes in real time.
  • • Evolve their models and monitor the effect of V2X techniques on overall traffic (status of collision avoidance manoeuvres, overall communications metrics such as delays and throughput, algorithms to reroute traffic, and dynamics of V2X nodes to optimise a given set of criteria) and continuously search for more optimised techniques based on a huge amount of actual field data.

 

It is critical to ensure that safety-critical applications and devices such as V2X work exactly as they were intended. Using computer simulations, a model of the system, its components and its environment can be built and be subject to rigorous testing. Model-based design tools enable the visualisation, analysis and testing of various traffic scenarios and vehicular dynamics and can test that the V2X system provides collision avoidance as expected.

 

Tomorrow

Vehicular transportation and urban safety is transforming radically through automation. Intelligent transportation systems such as autonomous cars are designed to be aware of the events happening around them. These situationally aware systems can respond to movements of other vehicles and pedestrians in real time.

With more and more cars on the roads using these types of automated driving features, including V2X, the safety and security of driving in general can be significantly improved. These steps are in the right direction towards reducing automotive collisions. It is indeed an exciting time for vehicle electronics.

Houman Zarrinkoub is senior wireless product manager for Mathworks

www.mathworks.com

Recommend to Colleagues: