Rohde & Schwarz trigger and decode option for Automotive Ethernet

Rohde & Schwarz Automotive Ethernet option

Rohde & Schwarz has introduced a trigger and decode option for 1000baseT1 Automotive Ethernet on its RTO and RTP oscilloscopes.

Similar to the existing 100baseT1 or Can bus analysis and decode capability, the K58 option can be used by OEMs and tier-one suppliers to analyse and decode the latest bus speeds in automotive digital designs.

The flexibility of Automotive Ethernet makes the simple twisted-pair network technology suitable for an increasing range of in-vehicle networks. To verify, commission and troubleshoot designs based on an Automotive Ethernet communication link, it is important to have an instrument that can not only measure and verify compliance to the standards but also decode the messages and reliably trigger on them.

The K58 option can perform this analysis. Users can debug and verify their in-vehicle networks and ECU implementations. The decoded data can be displayed in a table as well as in the usual honeycomb diagram. Parameters such as idle, mac or error frames are identifiable via defined colour codes.

With the firm’s RT-ZF7 probing fixtures, both the forward and reverse data streams can be decoded simultaneously. Additionally, the oscilloscopes support simultaneous decoding of up to four serial buses.

Search functions simplify analysis of long signal sequences. Specific message types, content and errors can be quickly isolated. All detected events are shown in a table with timestamps. The user can then examine the individual events in a zoom window with the proper timing correlation and navigate between the events.

Combing the trigger and decode functionality with the K35 bus measurements option, in-depth measurements, such as the error frame rate and number of consecutive frame errors, help to determine the stability of the link. More analysis of bus timing, such as the delay between frames or between any trigger event and the subsequent bus frame can be discovered. The error rates and frame timing are measured simultaneously, both important for automotive applications such as for autonomous driving.

The oscilloscopes decode protocol-specific trigger results, allowing fast and reliable debugging. The capability of combining bus measurements and statistics offers insight into bus capacity, error frame rates and latency issues. This enables faster development processes and gives engineers confidence in reliable performance of their products. No additional instruments are required.

www.rohde-schwarz.com

 

Recommend to Colleagues: