Infineon unveils SiC module at PCIM

Infineon HybridPack Drive CoolSiC

At this week’s virtual PCIM show, Infineon Technologies introduced an automotive power module with CoolSiC mosfet technology.

The HybridPack Drive CoolSiC is a full-bridge module with 1.2kV blocking voltage optimised for traction inverters in electric vehicles. The module is based on the automotive CoolSiC trench mosfet technology for high-power density and high-performance applications.

This offers higher efficiency in inverters with longer ranges and lower battery costs, particularly for vehicles with 800V battery systems and larger battery capacity.

“The 800V system of the E-GMP electric global modular platform represents the technological basis for the next generation of electric vehicles with reduced charging time,” said Jin-Hwan Jung, head of the electrification development team at Hyundai Motor Group. “By using traction inverters based on Infineon’s CoolSiC power module, we were able to increase the range of the vehicle by more than five per cent because of efficiency gains resulting from the lower losses of SiC compared to Si.”

The HybridPack Drive was first introduced in 2017, using Infineon’s silicon EDT2 technology, optimised to deliver efficiency on a real-world driving cycle. It offers a scalable power range of 100 to 180kW within the 750V and 1.2kV class.

This product is Infineon’s market-leading power module with a track record of more than one million pieces shipped for more than 20 electric vehicle platforms.

The CoolSiC version is based on the firm’s silicon carbide trench mosfet structure. Compared with planar structures, the trench structure enables a higher cell density. Therefore, trench mosfets can be operated at lower gate-oxide field strengths, resulting in increased reliability.

“The automotive e-mobility market has become highly dynamic, paving the ground for ideas and innovation,” said Mark Münzer, head of innovation at Infineon. “As the price of SiC devices significantly decreases, the commercialisation of SiC will accelerate, resulting in more cost-efficient platforms adopting SiC technology to improve the range of electric vehicles.”

The power module offers an upscale path from Si to SiC with the same footprint. This allows the inverter design to achieve higher power of up to 250kW in the 1.2kV class, greater driving range, smaller battery size, and optimised system size and cost.

To offer an optimal cost-performance ratio for different power levels, this product is available in two versions with different chip counts, resulting in either a 400 or 200A DC rating version in the 1.2kV class.

The first-generation of CoolSiC automotive mosfet technology is optimised for use in traction inverters, with a focus on achieving the lowest conduction losses, especially under partial load conditions. Combined with low switching losses of SiC mosfets, this enables an efficiency gain in inverter operation compared to silicon IGBTs.

Automotive CoolSiC mosfets are designed and tested to achieve short-circuit robustness and a high degree of cosmic ray and gate-oxide robustness, which is key for designing efficient and reliable automotive traction inverters and other high-voltage applications.

The module is qualified to the AQG324 norm for automotive power modules. It is in production now and will be available starting June 2021.

www.infineon.com

 

Recommend to Colleagues: