Accelerometer checks suspension and engine vibration

An analogue mems accelerometer for electrically controlled suspension and engine anti-vibration applications is available from Murata. Measuring 7.0 by 8.6 by 3.3mm and constructed from a single crystal silicon, the SCA720 sensor is mechanically robust and has no deformation up to 70,000g.

The accelerometer’s 3D structure uses capacitive sensing techniques that give it sensitive measurement characteristics and offset stability. Internal inert gas damping of the mems sensing element provides a mechanical low-pass filter that cuts off above 115Hz and provides a stable amplitude output and noise filtering.

By using an analogue output, the device can be placed a good distance away from the controlling unit without any interference to the sensors output. This flexibility of mounting is suitable for electrically controlled suspension (ESC) since it allows the freedom to place sensors where required rather than having to be concerned about the length of sensor connections.

Measurement of z-axis movement is possible with the company’s z-axis sensing element when mounted flat on a PCB that is positioned in an orientation parallel to the vehicle. The sensor is earth gravity compensated with a +1g offset where Vout is +2.5V DC. Measurement range is 2.11g in both directions, providing a Vout in the range from 0 to +5V DC.

To aid manufacturing and test processes, the sensor has all component, element and asic process and test data traceable from a 2D-matrix label affixed to the top of the device.

It is validated to the AEC-Q100 automotive component qualification standard.

www.murata.eu

Recommend to Colleagues: