Seaward tester checks EV charging stations

Hand held EV100 tester from Seaward

A test and diagnostic tool has been introduced by Seaward that can carrying out validation and fault finding on all types of AC electric vehicle charging and supply equipment (EVSE).

The hand held EV100 tester carries out all the tests to ensure that EVSE operates correctly and safely at the time of installation and as part of any on-going periodic maintenance schedules, in accordance with IEC 61851.

As well as carrying out basic field tests, more detailed diagnostic data from the chargepoint is retained in the unit and can be transferred to a mobile Android app using NFC wireless communications. This technical data can then be quickly sent to a specialist engineer or head office location for full remote fault diagnosis and records management purposes.

The lightweight and handheld unit simulates all the commonly used charging cable ratings to verify the correct response from the EVSE.

An set of tests and measurements are automatically carried out and displayed at the press of a button, including output voltage, maximum available charging current, earth loop impedance and RCD trip time. Insulation tests are also carried out on the EV charging cable to verify safety for users.

Importantly, the tester can confirm the presence of correct mains supply and earthing connections on single or three phase systems without the need for additional equipment or the dismantling the charging point to access internal conductors.

For diagnostic testing, the tester also simulates a number of vehicle faults and measures the EVSE response, including disconnection time and the amplitude, frequency and duty cycle of the PWM signal.

 

www.seaward.co.uk

 

 

 

Recommend to Colleagues: