IQD clock oscillators meet AEC-Q200 and TS16949

Clock oscillators for applications that require AEC-Q200 and TS16949 automotive grade products have been introduced by IQD. The models, housed in ceramic seam sealed packages, are available in five standard sizes – 2 by 1.6, 2.5 by 2, 3.2 by 2.5, 5 by 3.2 and 7 by 5mm.
All are available with PPAP documentation from levels one to five and are suitable for extreme environments found in typical automotive applications including ABS and airbag sensors, engine control units (ECU), high-speed automotive networks and tyre pressure monitoring system (TPMS) receivers.
All operate over the standard automotive operating range of -40 to +125˚C. Frequency stability options can be specified down to ±50 or ±25ppm over the industrial operating temperature range of -40 to +85˚C, which covers all applications be it in the engine compartment or in cab.
With the increasing need to reduce power, even inside vehicles, the clock oscillators are available in three voltages – 1.8, 2.5 and 3.3V. Typical current consumption on the 1.8V versions of the IQXO-542 Auto and CFPS-53 Auto models is 3mA.
All models deliver a cmos output, 15pF load with a rise and fall time of typically 5 to 7ns and the option of a tri-state function on pin one.
Low frequencies, such as 1MHz in the 7 by 5mm or 4MHz in the 2 x 1.6mm oscillators, which are not possible in the same sized packaged quartz crystal, are also available. The highest frequency available is 135MHz in the CFPS-73 Auto and IQXO-581 Auto models with the others being typically 50MHz.
The range complements IQD’s existing range of automotive grade quartz crystals.
