Four amplifiers suit aftermarket automotive audio products

Four digital-input, closed-loop I2S amplifiers for mid-power stereo audio applications including TVs, soundbars, portable docking stations, Bluetooth speakers and aftermarket automotive audio products have been introduced by Texas Instruments.

The TAS5760xx devices use a switching frequency of up to 1.2MHz, allowing designers to use smaller output filter components to reduce overall size and cost. They stream 20W continuous power per channel without a heatsink, and deliver a THD+N of 0.03% at 1W, crosstalk of -92dB and 66µV idle channel noise.

The devices are available in four pin-compatible, 48-pin versions: the TAS5760MD and TAS5760LD with headphone amplifiers and line drivers, and the TAS5760M and TAS5760L non-headphone versions. The TAS5760M and TAS5760L are also offered in 9 by 6mm, 32-pin packages.

The closed-loop architecture provides a power supply rejection ratio (PSRR) of 80dB, allows amplifiers to maintain constant power even when the battery output fluctuates. This also enables the use of lower cost power supply designs in systems with changing power supply levels, such as portable docking stations and Bluetooth speakers. RDS(on) is 120mΩ.

Supply range is from 4.5 to 26.4V, allowing battery and AC line operation to satisfy most mid-power applications.

Configuration options via software (I2C) and hardware (GPIO pins) control modes support multi-channel system designs. Amplifiers can be combined with the PCM1808 stereo analogue-to-digital converter (ADC), featuring 99dB signal-to-noise ratio (SNR), to create a high-performance audio signal chain.

The TAS5760xxEVM evaluation module includes a control console graphical development suite to simplify the evaluation, configuration and debug of audio products. Ibis models are available for verifying board signal integrity requirements.

The closed-loop I2S amplifiers are available in 12 by 8mm, 48-pin tssops.

www.ti.com

Recommend to Colleagues: