Hall sensor integrates capacitor to save space

MLX92242 Hall effect switch-latch IC from Melexis

An integrated end-of-line (EoL) programmable Hall sensor from Melexis Technologies supports direct connection into automotive and industrial designs without the need for PCB or discrete components 

The company has followed up the success of its MLX92242 Hall effect switch-latch IC, which provides EoL programmability and support for two-wire operation, with a version that is said to enable easier implementation and save space.

The device has a built-in capacitor so it can be implemented directly into the design without inclusion of supplementary board level components, which would increase the overall dimensions and necessitate additional soldering. It achieves this while still delivering identical performance and functionality to the original device, as well keeping the standard industry TO-92/UA package form factor, enabling drop-in replacement.

As with the standard device, a Hall sensing element, a voltage regulator covering 2.7 to 24V, a current sink-configured output driver and a series of IC protection mechanisms – overvoltage, reverse voltage, thermal shutdown and so on – are included, plus an eeprom via which EoL programming can be executed. The eeprom allows suitable magnetic thresholds to be set for the application, then subsequently locked. Alternatively, programming can be carried out in advance to user specifications.

A magnetic switching range spanning 1 to 64mT and a magnetic latching range of -64 to +64mT is achievable. Also, its temperature compensation capacity can counter the effects of magnetic drift.

Key uses are within the seat track position and seatbelt buckle latch detection systems needed to acquire vehicle occupancy data for increasing the effectiveness of air bag deployment, as well other applications such as electric power steering, door release latches and window lifter actuators.

The device is housed in a standard three-pin TO-92-flat package. The pin ordering has been changed to facilitate simpler connection. The VDD and GND pins are spaced 2.54mm apart so they match with legacy fitting configurations while also simplifying assembly directly to lead frames and moulded connectors. This means lead forming, which could potentially compromise the device’s operation, is not necessary

As it permit two-wire operation, as opposed to a conventional three-wire arrangement, while still delivering diagnostic capabilities, it reduces the quantity of wiring needed for implementation. This makes it suitable for space-constrained designs.

Operating temperature range is -40 to +150˚C and it exhibits resilience to electro-static discharge (ESD) strikes, with more than 8kV human body mode ESD compliance.

“Thanks to employment of our proprietary process technology, the die we have fabricated for the MLX92242 devices is significantly smaller than what is possible in other devices on the market,” said Peter Riendeau, marketing communications manager at Melexis. “This means we can integrate an additional capacitor into the design without any need to increase the package size, whereas alternative solutions are simply forced to do just that. As a result the MLX92242 has a definite advantage over the competition.”

www.melexis.com

Recommend to Colleagues: