Melexis extends sensor capability to high-current measurements

Melexis has introduced the MLX91216 XHF extra high-field current sensor, extending the ease and accuracy of its IMC-Hall technology into high-current measurement for emerging automotive applications.
Capable of measuring current to beyond 2kA, the sensor is suited to redundant monitoring of battery-management systems (BMS), over-current detection in smart fuses, and measuring phase currents in traction inverters and boost and recuperation inverters. With user-programmable filtering to adjust resolution, response time and bandwidth for optimum signal-to-noise ratio, the sensor has built-in diagnostics, including broken-wire detection.
The soic-8 surface-mount device contains the firm’s patented integrated magnetic concentrator (IMC) that enables accurate contact-free measurement of busbar current in combination with a simple U-shape magnetic shield.
When mounted on a PCB, the sensor is positioned over the busbar, within the shield, allowing easier assembly than conventional Hall sensors.
What differentiates the IMC-Hall technology from coreless options is that position is much less critical. The design can accept more mechanical movement because the measurement is not dependent on a magnetic field gradient.
Other technologies that are can result in very severe busbar machining causing important thermal hot spots.
On the other hand, IMC-Hall technology carries the advantages of coreless technologies, so it lends itself to smaller assemblies using surface mount packages. This avoids the use of more complex through-hole packages that often require specific lead bending and forming native to core based options.
Available now, it is AEC-Q100 grade-0 qualified for automotive applications and operates over the temperature range -40 to +150˚C. The sensor has a measurement range from ±20 to ±350mT with linearity down to ±0.2% full scale, 2μs response time, and high thermal stability with offset drift below 5mV and sensitivity drift within 1%.
