Mosfet from Diodes protects vehicle ECUs

A 40V p-channel mosfet from Diodes is designed to protect automotive electronic control units (ECUs) against the risk of reverse-battery connection. ECUs are used in a growing number of automotive control applications and, with some vehicles deploying up to 80 ECUs, the need to protect each one demands a simple and cost-effective product, which this mosfet is said to provide.
The DMP4015SPSQ mosfet acts as a diode, allowing current to flow when the battery is correctly connected and blocking the current when the battery is accidentally connected in the reverse direction.
Driving this device only requires a few passive components. By comparison, n-channel mosfets require a charge pump to provide the gate drive voltage, adding complexity, cost and component count. Eliminating the switching topology of a charge pump also avoids issues with EMI emissions.
The avalanche rugged device is 100 per cent unclamped-inductive switch (UIS) tested to ensure it will withstand the worst-case ISO7637 energy pulse that would occur if the supply was disconnected while powering an inductive load.
RDS(on) is less than 11mΩ to reduce power loss, resulting in lower temperature operation; this eases thermal design considerations and improves reliability. The parallel configuration of several mosfets can further reduce power losses, by a factor of n2.
The device comes in a Power DI 5060 package. Also available, for the same application, are the DMP4015SK3Q in TO252 (Dpak) package and DMP4015SSSQ in SO-8 package.
