Vishay DC-link capacitor survives harsh automotive conditions

Vishay Intertechnology has introduced an AEC-Q200 qualified DC-link metallised polypropylene film capacitor for use in the harsh conditions of automotive, energy and industrial applications.
Offering operation up to +125˚C, the Roederstein MKP1848e delivers ripple current up to 44.5A and withstands temperature humidity bias (THB) in accordance with Grade III of IEC60384-16 ed.3 – 60˚C/93% RH for 1344 hours at rated voltage.
With its high temperature operation and resistance to high humidity, the automotive-grade capacitor is suitable for automotive power conversion applications such as on-board chargers (OBCs), powertrains, hvac systems, e-compressors and DC-DC converters.
This DC-link capacitor also addresses the stringent needs for energy and industrial power conversion applications such as fast chargers, solar inverters, rectifiers for hydrogen electrolysers, battery storage systems, motor drives and UPS.
Rated capacitance is from 1 to 140µF and ESR down to 1.0mΩ, in rated voltages from 500 to 1300V DC. The devices provide 25% higher ripple current density than previous generations with the same volume, while its footprint and pitch options down to 22.5mm enable volume reductions up to 40 and 15%, respectively, at 500 and 900V DC.
To meet the standard high voltage levels of electric (EV) and plug-in hybrid electric vehicles (PHEV), the device withstands operating voltages from 250 to 800V DC at +125˚C for a limited time. It also has high thermal shock capabilities, withstanding 1000 temperature cycles from -40 to +125˚C, with a 30-minute dwell time for each temperature extreme.
The capacitor is available with customised terminals on request.
Samples and production quantities are available now, with lead times of ten weeks.
