Toshiba launches display interface bridge ICs for IVI

Toshiba TC9594XBG and TC9595XBG display interface bridge ICs

Toshiba Electronics has introduced two display interface bridge ICs for automotive in-vehicle infotainment (IVI) systems.

Due to the greater complexity and extended functionality of automotive IVI systems, the number of display panels incorporated into modern vehicles has increased significantly, with IVI systems often including several different display interface types, such as LVDS and so on. Consequently, some current systems cannot support emerging protocols such as display serial interface (DSI) and embedded DisplayPort (eDP) due to incompatibilities between interface standards.

To address this, designers are turning to interface bridge ICs such as Toshiba’s TC9594XBG and TC9595XBG.

The TC9594XBG supports a parallel input (24bit at 166MHz) and provides a four-lane one-channel Mipi DSI-TX output. The TC9595XBG can accept two input types – four-lane one-channel Mipi DSI or Mipi DPI (24bit at 154MHz) and outputs Vesa DisplayPort 1.1a.

Both devices offer WUXGA (1900 x 1200 at 24bit) resolution and are housed in a 7 by 7 by 0.65mm pitch VFBGA80 package. The TC9594XBG operates from -40 to +105˚C while the TC9595XBG covers -40 to +85˚C.

Toshiba has experience in developing Mipi bridge ICs for consumer use. The TC9594XBG and TC9595XBG devices add an automotive capability to the line, solving interface incompatibility problems, especially in IVI systems.

Sample shipments of the TC9594XBG device started last month and samples for TC9595XBG will follow later this year.

www.toshiba.semicon-storage.com

Recommend to Colleagues: