Diodes LED driver supports multiple topologies

An 85V automotive-compliant LED driver from Diodes supports multiple topologies with fault reporting.
The AL8866Q DC-switching LED driver-controller drives an external mosfet and supports buck, boost, buck-boost and single-ended primary-inductance converter (sepic) topologies for high-power LED lighting systems.
Applications include daytime running lights (DRLs), high and low beams, fog lights, turn lights, and brake and stop lights.
It operates within an input power supply range from 4.7 to 85V, covering the common 12, 24 and 48V battery power rails. This flexibility and multi-mode operation helps lighting designers standardise on a single component type, streamlining inventory and simplifying design processes.
The device has a fixed-frequency 400kHz peak current-mode control architecture. It incorporates a spread-spectrum frequency modulation technique to enhance EMI performance, which is compliant with the Cispr 25 class-five standard.
There is support for analogue and PWM dimming of the LED current via its dim pin and a 1% reference tolerance, enabling better brightness control and matching between lamps.
With an over 100:1 analogue dimming range, it achieves ±12% output current accuracy at 20% analogue dimming levels, making it more precise than similar LED drivers. Alternatively, PWM dimming from 0.1 to 1kHz achieves a 100:1 dynamic range.
A soft-start function gradually increases the inductor and switch current to reduce potential overvoltage and overcurrent at the output. An open-drain fault output indicates various fault conditions, which include LED output-overvoltage, LED output-open or short, cycle-by-cycle overcurrent protection, sense-resistor and shorted-inductor or diode detection, diode-open circuit, and thermal shutdown.
The device is available in the SO-8EP and U-DFN3030-10 packages, with an operating temperature of -40 to +125˚C.
