Thin-film chip resistor works at up to +155˚C

A precision automotive thin-film chip resistor with high-temperature operation to +155˚C with 100% power, derated linearly to zero power at +250˚C has been introduced by Vishay Intertechnology.
Providing a claimed nearly 100˚C extension in operating temperature range over traditional thin-film chip resistors, the AEC-Q200-qualified Patt has an absolute TCR down to ± 25ppm/˚C and laser-trimmed tolerances down to ± 0.1%.
With a load-life stability of less than 0.2% at +155˚C and full rated power for 1000 hours, the Dale resistor released is optimised for the low-noise, single-signal processing required to compensate for low offset and temperature drift in high-temperature environments, including under-the-bonnet automotive applications, high-precision oil and gas exploration, and telecoms and industrial equipment.
Available in the 0603 case size (with additional case sizes in development), the resistor has a range from 2.75Ω to 120kΩ, with non-standard values available. The device has noise figure of less than -35dB, voltage coefficient of 0.1ppm/V, power rating of 150mW and 75V maximum working voltage range.
The device has a high-purity ceramic substrate and gold terminations over nickel barrier for high-temperature HMP soldering, and it withstands ESD to 2kV per AEC-Q200 class 1C. The resistor is moisture resistant to MIL202, method 202; flame resistant in accordance to UL94 V-0; sulphur resistant per ASTM B809-95 humid vapour test; and 100% visually inspected per MIL-PRF-55342. The device is lead-free, RoHS-compliant and halogen-free.
